Printable PU
CDU-DP white is a basic step forward in heat transfer film, its lightweight and efficient to apply on your garment, you will be amply satisfied with its high-colored printing.
- Matte finish
- Distinct colours
- High wash resistance
PRINT-CUT
CPT SV (Printable Silver)
This printable film provides a slight shimmery reflective finish, ideal for special or unique designs requiring a silver color.
CPT CL (Printable Clear)
Do you want to see your own pattern or color of the garment well? Then, we recommend Printable Clear!
TDS(Technical data sheet) PDFWE RECOMMEND THE FOLLOWING CONDITIONS TO ACHIEVE THE BEST RESULTS :
-
Temperature 150℃ -
Pressure 34psi -
Time 10s -
Peel Type Hot peel -
Washing machine and
handwash only
HOW TO USE
-
1 STEP
SET MATERIAL
Feed the material into the printer skin side facing up.
-
2 STEP
CUTTING
- Select an existing design or create your own on the computer.
- Change the machine settings according to the materials conditions.
(If unsure, see the. PDF provided above.)
-
3 STEP
WEEDING
On a flat surface, take a weeder and remove any parts not neccesary.
-
4 STEP
TRANSFER
- In order to remove the design from PET, it must be attached to the adhesive side of the MASK PAPER.
- After application, it's essential to ensure there are no air bubbles and the design is firmly stuck to the adhesive side.
-
5 STEP
PEEL OFF PET
Peel off PET from the transfer to apply to your garment.
-
6 STEP
PREHEAT & POSITION
The ideal heating, pressure and time conditions for press can be seen in the photo above.
-
7 STEP
HEAT APPLY
Preheat the garment and arrange the transfered design in your desired placement and then press.
-
8 STEP
PEEL OFF MASK PAPER
Gently remove MASK PAPER from the top side of the design.
( *Disclaimer - These instructions may very according to the material and machine type used-for best results check the specifications. )