SOFT METALLIC
This film comes in two fun colours, gold and silver which will make your designs pop wherever you go.
- Economical
- Stretchy and soft touch
- Easy application
- Washes well
PLOTTER CUT
WE RECOMMEND THE FOLLOWING CONDITIONS TO ACHIEVE THE BEST RESULTS :
-
Temperature 150℃ -
Pressure 34psi -
Time 10s -
Peel Type Cool peel -
Washing machine and
handwash only
HOW TO USE
-
1 STEP
SET MATERIAL
Feed the material into the plotter machine hotmelt side facing up.
-
2 STEP
CUTTING
- Select an existing design or create your own on the computer
(NB : Design must be mirrored.) - Change the machine settings according to the material's conditions
(If unsure, see the PDF provided above.)
- Select an existing design or create your own on the computer
-
3 STEP
WEEDING
On a flat surface take a weeder and remove any parts not necessary for your design.
-
4 STEP
PREHEAT & POSITION
The ideal heating, pressure and time conditions for press can be seen in the photo above.
-
5 STEP
HEAT APPLY
Preheat the garment and arrange the weeded design in your desired placement and then press.
-
6 STEP
PEEL OFF CARRIER
Gently remove PET film from the top side of the design.
( *Disclaimer - These instructions may very according to the material and machine type used-for best results check the specifications. )
