PLOTTER CUT

PU PVC GLITTER METALLIC HOLOGRAPHIC FLOCK REFLECTIVE GLOW-IN-THE-DARK SOFT METALLIC SUBLI-STOP NSTRETCH PU

PRINT CUT

PRINTABLE_PU PRINTABLE＿PVC PRINTABLE＿MIRROR NPRINTABLE_ALL IN ONE HOT FIX TAPE PRINTABLE_GLOW-IN-THE-DARK PRINTABLE_SUBLI-STOP PRINTABLE＿GLITTER

PLOTTER CUT

PU

PU’s thin, light application means it is flexible while maintaining high quality.
Made from environmentally friendly material which gives a soft finish, and isn’t harmful on your skin.

  • Semi-matte
  • Flexible and durable
  • Easy to cut and weed
  • Extensive variety of colours available
  • Warm peel
TDS(Technical data sheet) PDF

WE RECOMMEND THE FOLLOWING CONDITIONS TO ACHIEVE THE BEST RESULTS :

  • Temperature 150℃
  • Pressure 34psi
  • Time 10s
  • Peel Type Hot peel
  • Washing Machine and
    handwash only

HOW TO USE

  • 1 STEP SET MATERIAL

    Feed the material into the plotter machine hotmelt side facing up.

  • 2 STEP CUTTING
    • Select an existing design or create your own on the computer
      (NB : Design must be mirrored.)
    • Change the machine settings according to the material's conditions
      (If unsure, see the PDF provided above.)
  • 3 STEP WEEDING

    On a flat surface take a weeder and remove any parts not necessary for your design.

  • 4 STEP PREHEAT & POSITION

    The ideal heating, pressure and time conditions for press can be seen in the photo above.

  • 5 STEP HEAT APPLY

    Preheat the garment and arrange the weeded design in your desired placement and then press.

  • 6 STEP PEEL OFF CARRIER

    Gently remove PET film from the top side of the design.

( *Disclaimer - These instructions may very according to the material and machine type used-for best results check the specifications. )

COLOR CHART

Detail View